GAIN STANDARD HORNS
Gain standard horns are used for measurement of antenna gain by a comparison method such as Procedure 12.2.1
of IEEE Std. 149-1979. They may also be used as source antennas in anechoic test chambers and for many other purposes such as fixed site antennas.
Seavey Engineering offers a wide range of gain standard horns in convenient sizes and with integral mounting brackets.
Horns are fabricated in aluminum and have a paint/iridite finish. In lower frequency bands, integral coaxial transitions are standard.
SPECIFICATIONS
Model
Number |
Frequency
GHz |
Waveguide
or RF Port |
Nominal Gain
dBi |
Size
E
(Inches) |
Size
H
(Inches) |
Size
L
(Inches) |
Wageguide Size
or Flange |
| SGA-04N |
0.40 - 0.50 |
N Jack |
10 |
21.0 |
27.0 |
20.0 |
(WR-1700) |
| SGA-05N |
0.50 - 0.70 |
N Jack |
10 |
17.0 |
22.0 |
28.0 |
(WR-1500) |
| SGA-07 |
0.70 - 1.20 |
WR-975 |
16 |
24.0 |
30.0 |
35.0 |
WR-975 |
| SGA-10 |
1.10 - 1.70 |
WR-650 |
16 |
16.3 |
21.9 |
21.5 |
WR-650 |
| SGA-20 |
1.70 - 2.60 |
WR-430 |
16 |
10.8 |
14.5 |
14.5 |
UG-437A/U |
| SGA-20H |
1.70 - 2.60 |
WR-430 |
18 |
14.0 |
18.0 |
24.0 |
UG-437A/U |
| SGA-22 |
2.20 - 3.30 |
WR-340 |
17 |
9.0 |
12.0 |
15.0 |
UG-554/U |
| SGA-30 |
2.50 - 4.20 |
WR-284 |
18 |
9.5 |
12.7 |
16.5 |
UG-584A/U |
| SGA-30L |
2.60 - 3.95 |
WR-284 |
10 |
3.3 |
4.3 |
8.5 |
UG-584A/U |
| SGA-40 |
3.30 - 4.90 |
WR-229 |
18 |
7.5 |
10.5 |
12.6 |
CPR-229F |
| SGA-40H |
3.30 - 4.90 |
WR-229 |
19 |
9.0 |
12.3 |
14.0 |
CPR-229F |
| SGA-50 |
3.80 - 6.00 |
WR-187 |
18 |
6.3 |
8.5 |
10.5 |
UG-407/U |
| SGA-50L |
3.95 - 5,85 |
WR-187 |
10 |
2.3 |
2.8 |
4.0 |
UG-441/0 |
| SGA-70 |
5.85 - 8.20 |
WR-137 |
18 |
4.3 |
5.8 |
8.0 |
UG-441/U |
| SGA-70L |
5.85 - 8.20 |
WR-137 |
10 |
1.5 |
2.0 |
2.8 |
UG-441/U |
| SGA-70H |
5.85 - 8.20 |
WR-137 |
22 |
8.4 |
11.4 |
20.0 |
UG-441/U |
| SGA-80 |
7.05 - 10.0 |
WR-112 |
18 |
3.0 |
5.0 |
5.9 |
UG-138/U |
| SGA-80L |
7.05 - 10.0 |
WR-112 |
10 |
1.3 |
1.6 |
3.5 |
UG-138/U |
| SGA-90 |
7.80 - 12.6 |
WR-90 |
18 |
3.0 |
4.0 |
6.5 |
UG-135/U |
| SGA-90L |
8.20 - 12.4 |
WR-90 |
22 |
6.0 |
7.0 |
15.0 |
UG-135/U |
| SGA-90H |
8.20 - 9.50 |
WR-90 |
22 |
6.0 |
7.0 |
15.0 |
UG-135/U |
| SGA-110 |
10.0 - 15.00 |
WR-75 |
22 |
4.3 |
6.0 |
12.3 |
MIL-F-3922 53-008 |
| SGA-110H |
10.1 - 10.70 |
WR-75 |
25 |
7.0 |
8.8 |
21.6 |
MIL-F-3922 53-008 |
| SGA-150 |
12.0 - 18.00 |
WR-62 |
21 |
3.0 |
4.0 |
6.0 |
UG-1665/U |
| SGA-150L |
12.4 - 18.00 |
WR-62 |
10 |
0.7 |
1.0 |
1.6 |
UG-1665/U |
| SGA-220 |
18.0 - 26.50 |
WR-42 |
22 |
3.3 |
4.0 |
10.7 |
UG-587/U |
| SGA-330 |
26.5 - 40.00 |
WR-28 |
22 |
2.4 |
2.8 |
6.5 |
UG-587/U |
OPTIONS:
- Sealed Aperture Windows (add "W" to Model Number)
- Waveguide-to-Coax Adaptors (see Page 117)
- Special designs with lower or higher gains than listed
- Modified Mounting Brackets
|
 |
 |
 |
| Model SGA-05N |
Model SGA Series Family |
Model SGA(L) Series Family |
