CALIBRATION SYSTEMS, MONITOR HORNS


Special Calibration Standard Antenna Systems
Model AS72-72C - 7.25 - 8.4 GHz. Parabolic Reflector, 40 dBic gain, Dual Circular polarization, Type N jacks (includes 1.8 meter diameter reflector, transit case, feed system and mount). Used as a secondary gain standard at NIST for characterizing DSCS satellite equipment. Model 9531-870 - 1.525 - 1.661 GHz. 0.85 meter diameter 2-panel parabolic reflector, heavy-duty tripod mount, transit case, demountable circulaly polarized feed system, calibrated attenuators, filters, LNA with power supply and BIT test provisions in a weather-proof NEMA enclosure. Used as a transportable Earth Station for monitoring AMSC/TMI L-band satellites.

Model AS72S-72C
1.2M DSCS Calibration Standard

Model 9531-870
0.85M AMSC/TMI Monitoring Station
Model 9452-800 - 13.955 GHz. 0.6 meter offset reflector specially designed and defocussed to achieve a main beam flat within +/- 0.05 dB over 1 degree. Used to monitor the downlink signal of the ADEOS satellite during polar orbit passes. Dual linear polarization. Model 9848-800 - 1.44 - 1.51 GHz. Similar to Model 9531-870. Also includes LHCP and RHCP omni antennas. Used as a monitor station for Worldspace satellites.

Model 9452-800
0.6M Antenna ADEOS Standard

Model 9848-800
33-inch Worldspace Monitor Stations

Monitor Horns
The following are low-cost pyramidal linear horns with an integral SMA Jack RF port and a flat rear mounting flange perpendicular to the boresight axis. They are available in commonly-used frequency bands and are very useful for general signal monitoring purposes. Nominal gain is 10 dBi.

Model
Number
Frequency
GHz
Waveguide
Size
Dimensions
Inches (E x H x L)
8748-830
2.60 - 3.95
WR-284
4.0 x 5.0 x 6.0
8748-800
3.40 - 4.20
WR-229
2.8 x 3.8 x 4.0
8748-810
5.85 - 8.50
WR-137
1.5 x 2.0 x 4.0
8748-840
8.20 - 12.40
WR-90
1.3 x 1.6 x 4.0
8748-820
10.70 - 14.50
WR-75
0.9 x 1.2 x 4.0

Return to Catalog Page 21