 Model MFA-46 - Low-pass Filter Pass-band 3.7 - 4.2 GHz. Insertion loss 0.25 dB maximum. Reject 5.925 - 6.525 GHz; isolation 55 dB, minimum. VSWR 1.15, maximum. CPR-229G waveguide flanges each end. Overall length 7.35 inches. Aluminum, brazed construction, fully sealed. |
 Model MFA-1214 - Low-pass Filter Pass-band 10.95 - 12.2 GHz. Insertion loss 0.25 dB maximum. Reject 14.0 - 14.5 GHz; isolation 35 dB, minimum. VSWR 1.15, maximum. WR-75 brass flanges each end. Overall length 3.75 inches. Sealed. |
 Model DFA-1214 - Three-Port Diplexer Three-port device separates receive (11.7 - 12.2 GHz) and transmit (14.0 - 14.5 GHz) signals from common port. All waveguide ports WR-75 flanges. Insertion loss, receive, 0.35 dB, maximum - transmit, 0.40 dB, maximum. Isolation (transmit-receive in transmit band), 55 dB, minimum. VSWR 1.20, maximum. Sealed construction. Overall length 12.5 inches. |
 Model 8956-810 - High-pass L/S-band Filter Isolates L-band transmitter from S-band receiver. SMB coaxial jack output, type N jack input. Insertion loss 0.05 dB, maximum in 2590 +/- 20 MHz passband. Rejects 1618 +/- 20 MHz with more than 35 dB isolation. Passband VSWR 1.15, maximum. 100 watts CW. Size 4 x 2 x 1 inches. Sealed, aluminum construction, suitable for airborne use. |
 Constructed as a simple waveguide-below-cutoff filter, this rectangular waveguide cavity passes 2.2 - 2.3 GHz with an insertion loss of 0.2 dB and rejects signals below 1.84 GHz by a minimum of 35 dB. It measures 3 x 2 x 18 inches and has two SMA jack RF ports. |
 This power divider handles a minimum of 2 KW average power and operates in the 325 - 525 MHz frequency band. The design uses a 3-step Tschebyscheff transformer. It has a 7/8 inch 50 ohm EIA common RF port and four Type N jack output connectors. It is fully sealed, is made of highly corrosion-resistant materials and can be pressurized to 5 psig. Overall length is 19.0 inches. |