SC-10AC Polarization Controller
For ESR- and OSR-series antenna feeds. Provides remote selection of linear polarization. When used with feeds having remotely controlled circular polarization, can be employed to adjust feed polarization to vertical, horizontal linear or right-hand and left-hand circular. Operates from 115VAC, 60 Hz, 12 watts.

PR-120 Polarization Rotator
Interfaces with any standard Seavey Engineering Ku-band scalar feed faceplate to provide remote linear polarization. Specify 3-wire servo or DC motor.

FP-120 Scalar Feed Faceplate
10.7 - 12.75 GHz. For DBS applications. Specify dash number for reflector F/D ratio. See pages 82, 83 - Note 4.

8443-02 WR-75 to CR-62 Circular Waveguide Adaptor
Mates with standard DBS low-noise converters having CR-62 circular waveguide interfaces. Other end is a flat WR-75 rectangular waveguide flange interface.

8300-122H WR-75 Waveguide Bend, H-Plane
Swept waveguide 90° bend with WR-75 flanges and 1.5-inch leg length. Includes flange hardware.

8500-20 WR-75 Waveguide Spacer
3/16-inch thick. Has grooves for sealing on each face. Includes O-rings and flange hardware. For pressure sealing mating WR-75 flat flanges.

8207-16 WR-75 Waveguide Bend, E-Plane
Die-cast, low cost zero internal radius waveguide 90° bend with flat WR-75 flanges and 1.0-inch leg length. Includes flange hardware.

8443-07 End-on WR-75 to SMA Jack Adaptor
14.0 - 14.5 GHz. Grooved WR-75 flange one end, SMA jack connector other end. Overall length 1.5 inches. Sealed, 50 W average power. Optional tuning for 10.5 - 12.75 GHz on request.

Servo Motor
3-wire servo motor for ESR- and OSR-series feeds.